Craftsman CompuCarve 133.217540 Manual del operador descargar pdf (Pagina 17)

Sears, Roebuck and Co. CompuCarve™ System (Rev 1.18) 04/23/07

Navigating the Menus Via the Keypad and LCD

For input and display of information the CompuCarve machine employs a

tactile keypad and LCD display. All operations require the user to input

information at the actual machine location via the keypad (as opposed to

information input and passed through the design software). The amount

of information needed is dependent on the operation requested. The

layout of the keypad is shown below.

The CompuCarve’s LCD display consists of two lines. Typically, the

display will print a menu name or a prompt on the top line and a related

menu option on the second line.

The LCD display’s contrast may be adjusted with the small knob

located directly below the keypad. To turn it, place a thumb on the

knob’s surface and press in while twisting.

Use the keypad arrows to navigate the menu structure. Alternatively the

shortcut keys on the keypad can be used if the user is familiar with the

options. Browse using the up-arrow, down-arrow, and the ENTER key

on the keypad. As described previously, when a menu is displayed, the

menu name will be on the top line and the current menu option will be

displayed on the bottom line of the display. To browse the other menu

options simply press the down-arrow on the keypad to move to the next

option. To return to a previous option, press the up-arrow. When the

bottom of a menu options list is reached, pressing the down-arrow key

will wrap back to the top of the menu.

Pressing the STOP button while in the menu structure will

automatically return the user to the previous menu prompt.

After an option is selected within a menu the machine may offer further

choices to be selected, or it may require additional data about the board

and the type of cut desired. This may require a keypad entry.

FIGURE 15: COMPUCARVE

INPUT KEYPAD

IGURE 16: COMPUCARVE

LCD DISPLAY

CarveWright Main Menu

1) Project Menu

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 45 46

Sin comentarios

Craftsman CompuCarve 133.217540 Manual del operador Pagina 17