Craftsman 917.28857 Manual del operador descargar pdf (Pagina 11)

The operation of any tractor can result in foreign objects thrown int_

the eyes, which can result in severe eye damage, Always wear safety]

glasses or eye shields while operating your tractor or performing any]

adjustments or repairs. We recommend standard safety glasses ora_

wide vision safety mask worn over spectacles. |

HOW TO USE YOUR TRACTOR

TOSET PARKING BRAKE

Your tractor is equipped with an operator

presence sensing switch, When engine is

running, anyattempt by the operator to leave

the seatwithout first setting the parking brake

wilt shut off the engine.

1. Depress brake pedal (B)altthewaydown

and hold.

2. Pull parking brake lever (C) upand hold,

release pressure from brake pedal (B),

then release parking brake lever. Pedal

should remain in brake position. Make

........... sure parking brake will hold tractor se-

cure.

STOPPING

MOWER BLADES -

• To stop mower blades, move attachment

clutch controito disengaged position (r_).

NOTE: Failure to move throttle control be-

tween half and full speed (fast) position, be-

fore stopping, may cause engine to"backfire",

• Turn ignition key (F) to "STOP" position

and remove key. Always remove keywhen

leavingtractorto prevent unauthorized use.

• Never use choke to stop engine.

IMPORTANT: Leavingthe ignitionswitchin

any position otherthan "STOP" willcausethe

battery to discharge and go dead,

NOTE; Undercertain conditions when tractor

isstanding idlewith the engine running, hot

engine exhaust gases may cause "brown-

ing" of grass. To eliminate this possibility,

always stop engine when stopping tractor

on grass areas.

_CAUTION" Always stop tractor com-

pletely, as described above, before leaving

the operator'sposition,

TO USE THROTTLE CONTROL

Always operate engine at fuI_speed (fast).

• Operating engine at tess than ful! speed

(fast) reduces engine's operating effi-

ciency.

• Full speed (fast) offers the best mower

performance.

(1"_1)Attachment (r_) Attachment

ClutchControl ClutchControl

"Engaged.... Disengaged"

GROUND DRIVE -

• To stop ground drive, depress brake pedal

al! the way down.

IMPORTANT: Forward and reverse drive

pedals return to neutral position when not

depressed.

ENGINE -

• Move throttle control (D) between halfand

full speed (fast) position.

TO MOVE FORWARD AND BACKWARD

The direction and speed of movement

is controlled by the forward and reverse

drive pedals.

1. Start tractor and release parking brake.

2, Slowiy depressforward (K) orreverse (L)

drive pedal to begin movement, Ground

speed increases the further down the

pedal is depressed.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Comentarios a estos manuales

Sin comentarios

Craftsman 917.28857 Manual del operador Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Tractor Craftsman 917.28857